Warning
For professional installer use only.
Step 1
Always decontaminate using eraser sponge and all purpose cleaner or strong dish soap. Neutralize with vinegar/soap wash. Fully dry.
Step 2
All restorative polishing and correction should be performed prior to prep washing.
Step 3
Clean the paint using a 50% IPA (isopropyl alcohol) to water mix in a trigger sprayer. Mist the paint then wipe down with a microfiber towel or use panel wipe solvent.
Step 4
Wipe on coating by hand using a sponge or coating block, panel by panel. Wait 15-45 seconds and level with microfiber.
Step 5
Wait 1 hour before walking on or touching treated areas. Wait 24 – 48 hours before vessel gets launched back in water.
*See full installation guide for detailed application information.