Step 1
If contaminated with oils or wax use general purpose cleaner first.
Step 2
Final prep using a 50% IPA (isopropyl alcohol) to water and mix in a trigger sprayer. Mis the object then wipe down with microfiber towel.
Step 3
Wipe on using micro suede towel or microfiber sponge. For thick coat leave product to level without wiping off.
Step 4
Certain components can use airbrush/HVLP spray application. Apply to desired thickness. Let dry 1 hour before touching.
Step 5
Allow cure for 24 hours before putting gear into action.